User Guide
⚙️ Basic Operation
Power On/Off: Tap the power button once.
Change Modes: Press and hold the power button.
🐾 Tips for First Use
Every cat is different, and it may take a little time for them to warm up to new toys like the Racer Tail.
If your kitty seems unsure, here are a few playful ways to spark their interest:
1. Gentle Introduction: Start with slow, soft movements using the remote control. This helps your cat feel more comfortable and less overwhelmed.
2. Peek-a-Boo Play: Lightly cover the Racer Tail with a thin blanket. The subtle movements underneath may grab their attention.
3. Familiar Touch: Tie a small toy your cat already likes to the Racer Tail’s tail using a soft string. Familiar scents or textures can make it more inviting.
✨ Take your time! Encouraging your cat with treats, praise, and gentle interaction can help them feel more confident — let them explore the Racer Tail at their own pace and celebrate every little sign of curiosity.
🎮 Different Modes
The LED light shows which mode is active:
🟢 Green (steady): Normal Mode
• 5-minute play session, then shuts off automatically
• Great when using the remote
• Tap the button to turn off manually
🔵 Blue (steady): Smart Mode
• 5-minute play session, then enters standby
• Reactivates with any touch for another 5 minutes
• Tap the button to manually enter standby mode
🕹️ Remote Control
To Activate: Just press any direction on the remote while Racer Tail is on.
To Deactivate: Either press the center button on the remote or simply wait 30 seconds without using it — it'll turn off automatically.
💡 LED Indicators
Red (flashing): Battery is low – time for a recharge!
Blue (flashing): Currently charging.
Green (steady): Fully charged and ready to roll!
🚀 Speed Modes
Tap the “Speed” button on the remote to switch between Fast and Slow.
Works in both Manual and Smart play styles!
🛠️ Helpful Tips
Be sure to fully charge before using it for the first time.
Designed for indoor fun – bright sunlight or certain lights might affect how the sensors work.
Clear any fur or dirt from the wheels regularly so it runs smoothly.
If Racer Tail flips upside down, the tail is designed to help it flip back. You can also press the center button on the remote to assist.
Wheels pop off easily for cleaning.
Swap out worn feather accessories to avoid your cat accidentally swallowing loose bits.
⚠️ Safety Note
This is a toy for pets. Contains small parts not suitable for kids under 3 years old.
🔘 How to Use It
Turn On/Off: Tap the power button briefly to start or stop play.
Change Modes: Hold the power button for a few seconds to switch modes.
Adjust Speed: Press once the power button to flip between fast and slow mode.
🐾 Getting Started with Your Cat
Every cat is different, and some might need a little warm-up before falling in love with Runner Tail. Here are a few playful ideas to help them get curious:
The blanket Trick : Gently drape a thin blanket over part of Runner Tail. The hidden movement can be super intriguing to curious paws!
Start Slow : Begin with the slow speed setting it’s perfect for shy or cautious cats. You can switch speeds anytime with a quick button press.
Custom Tail Fun : Attach a small toy or soft string to the tail for a familiar scent or texture. This little personal touch might make it feel more welcoming.
💡 Keep sessions short at first, and always reward your kitty with treats or affection when they show interest. Patience makes playtime magic!
🌈 Play Modes & Light Guide
Wondering which mode you're in? Just check the LED light!
🟢 Green Light – Normal Mode
Active play for 5 minutes, then it powers off.
Tap the button again anytime to end the session manually.
🔵 Blue Light – Smart Mode
Runs for 5 minutes, then switches into standby mode. (Perfect if your cat likes to sneak in and out of playtime)
Any Touch will reactivate it for another 5 minute play session.
Short press the power button and cycle to enter standby mode manually
⚙️ Speed Settings
Tap the power button to switch between Slow and Fast speeds.
Slow and Fast speeds works in both Manual and Smart play modes.
Mode Cycle:
Power Off → Slow mode→ Fast mode → Power Off → Fast Mode → Slow Mode → (Repeats continuously)
🔋 Charging Your RunnerTail
To recharge the RunnerTail, connect the included USB-C cable to the charging port located on the side, under the soft silicone cover.
Plug into any standard USB port, like a laptop or wall charger.
⚠️ Do not use fast chargers, as they may not work properly with the device.
💡 LED Status Guide
🔴Red (blinking): Battery is low needs charging.
🔵Blue (blinking): Charging in progress.
🔵Blue (steady): Battery is fully charged and ready to go!
📝 Helpful Reminders
Fully charge the toy before using it for the first time.
Indoor use only not designed for outdoor environments.
Keep the body clean and free of fur or dust for smooth operation.
The gray shell detaches for quick and easy cleaning.
Swap out old feather parts regularly to avoid any risk of your cat swallowing them.
⚠️ Caution: This is a toy made for pets. Contains small parts it's not safe for children under 3 years old.
🐾 Getting Started – First-Time Use Tips
We know every pet is different, and adjusting to new tools like the VAPOBRUSH can take time. Here are a few helpful ways to ease them into it:
1. Take It Easy: Let your pet get familiar with the brush slowly. Use light strokes and reward them with cuddles or treats.
2. Skip the Mist (At First): To avoid overwhelming your pet, try using the brush without activating the mist feature. The soft bristles alone provide a soothing massage. Once your pet feels calm, you can gradually introduce the mist.
3. Make It Pleasant: Link grooming time with good vibes—gentle talking, petting, or giving snacks to make it a happy experience.
🔘 Quick Controls
Press the power button briefly to turn the mist on or off.
✋ How To Use Your VAPOBRUSH
Flip out the 360° swivel handle for a more comfortable grip.
Press the button to activate the mist function.
Gently brush your pet’s fur, letting the mist help moisturize and relax the coat.
💧 Refilling the Water Tank
Open the tank cover carefully.
Pour in lukewarm water — don’t overfill it to avoid leaks. ⚠️ The brush isn’t waterproof!
Never submerge the VAPOBRUSH in water.
Securely close the tank lid.
🧼 Cleaning & Care Tips
After every session, gently clean the bristle head to remove fur, dust, or other debris.
Open the water tank and leave the cap off to let it air dry completely this helps avoid moisture buildup or odors.
💡 Light Indicators Explained
🔵 Blue Light: Mist is active and running.
🔴 Red Light: Device is currently charging.
🔴 Red Light Off: Charging is complete — your VAPOBRUSH is ready to use!
⚠️ Things To Remember
Charge the VAPOBRUSH fully before using it for the first time.
This device is not waterproof avoid getting it wet.
The bristle head is detachable for easier cleaning, but it might take a little effort to reattach.
If you're not planning to use the brush for a while, empty the water tank to avoid any damage or mold.
🛑 WARNING: This is a grooming tool designed for pets. It contains small parts and is not suitable for children under 3 years old.
💧 What is Fountain Fresh?
The Fountain Fresh is an automatic water fountain designed to keep your cat hydrated and healthy. With gently flowing water, it encourages your cat to drink more often — because moving water is just more fun (and fresher)!
🔁 How does it work?
The Fountain Fresh uses a quiet pump system to keep the water constantly circulating. This movement helps keep the water cleaner, cooler, and much more appealing to your cat than still water in a bowl.
🧼 Is it easy to clean?
Yes! The Fountain Fresh easily disassembles for quick cleaning. The filter is replaceable, and all parts can be rinsed with water. Keeping it fresh takes just a few minutes.
💧 Do Not Exceed Water Capacity
The maximum capacity of the water tank is 3 liters; please avoid exceeding this limit to ensure proper operation.
🔄 When to Replace the Water
It is recommended to replace drinking water onece every 3 Days, and clean the inside of the Tank and filter element
🧽 Dry the Anti-Slip Mat
After cleaning the water tank, please dry the anti-slip mat located at the bottom outside of the water tank to maintain its anti-slip effect.
🛠️ Clean the Silent Water Pump
The silent water pump should be cleaned once a month to prevent dirt from blocking the waterway and affecting water discharge. Watch for abnormal issues such as obstruction.
🔥 Avoid High Water Temperatures
The water tank is not resistant to high temperatures; the water temperature in the tank must not exceed 60°C.
